Power Stop 10-12 Lexus HS250h Rear Z17 Evolution Geomet Coated Brake Kit

Features Direct replacement for factory incandescent 7440/7443-size turn signal bulb. Sixteen high-power 5W LEDs arranged in all directions. Metal heatsink to maintain high output. Inductive constant-current drive circuit. Increased output with LED appearance. Plug and play simple installation. 510 lumens per bulb. Overview Upgrade. Add more light output and a modern appearance to your vehicle with the 7440/7443 XP80 turn signal bulb. Populated with twelve side-firing 5W-rated LED chips and four forward-facing 5W-rated LED chips this is the brightest self-contained automotive LED bulb on the market. Housed in an aluminum casing with a textured finish for maximum heatsinking properties the XP80 will last for years to come. Best of all installation only takes minutes – simply take out your factory bulb and the XP80 will fit snugly in the socket. Brightness. At 510 lumens the XP80 will provide about double the total light output compared to your factory bulb. All Diode Dynamics LED lighting is rated with accurate measured lumen figures not calculations or guesses. We test the true output in-house and provide you the real numbers to compare. Reliability. Unlike other bulbs on the market this bulb is built with constant-current circuitry along with transient suppression. That means this bulb will last for years not months with no flickering or failure. And like every Diode Dynamics product it’s backed by an industry-leading three-year replacement warranty.
Add more light output and a modern appearance to your vehicle with the 7440/7443 XP80 turn signal bulb. This is the brightest self-contained automotive LED bulb on the market.
Included Quantity: Two (2)

Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.
Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of DOT 4 specificationis required. The brake fluid is also suitable for use in ABS brake systems.
Liqui Moly DOT 4 brake fluid can be used with all conventional brake fluid bleeding devices. Liqui Moly DOT 4 brake fluid is miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer. Caution: Brake fluid corrodes the paintwork of cars; in the event of spillage, rinse immediately with plenty of water. Do not use in mineral oil based central hydraulic systems. Observe manufacturers instructions!